Click the question.
The supported operating systems are as follows:
Check the following:
After you have checked the above, run Driver Installation Tool again.
The number of printer icons created will correspond with the number of printers available.
In other cases, it is alright to delete the created printer icons as they can be re-created.
It is not supported in this CD-ROM.
Visit Fuji Xerox Web Site and download the driver for the target model. Then install the driver.
To display the Fuji Xerox Web Site, go to the first screen of [Driver CD Kit] and click [Fuji Xerox Web Site]. Then click [Driver Download].
Once the printer is installed with Driver Installation Tool, the driver file saved in the computer will be updated to the latest version.
To update an installed print driver, select [Print Driver Update] in Driver Installation Tool. For information on how to update the driver, refer to "Driver Installation" in this documentation.
Print a test page according to the following procedure:
The test print is completed once a test page is printed by the printer.
Alternatively, if the driver was installed with Driver Installation Tool, on the last screen, select the target printer and click [Print Test Page]. A test page will be printed.
Click [Use Disk] and specify the folder in this CD-ROM.
To find out where the drivers of the different models are stored, refer to the product information that is shown in the displayed menu after selecting [Documentation] on the first screen of [Driver CD Kit].
Check if the target printer is installed with other paper trays.
If paper cannot be selected on the Properties sheet of the print driver, it is possible that the driver setup is not compatible with the latest device options configuration. In this case, install the document monitor on the computer. Select "Printer Configuration Update" on the document monitor and change the settings to cater for the latest device options configuration.